The Mud Pit > Wrenching
Cage
centralmasssamurai:
Hey guys,,Scott here, Im the guy doing Nates cage, We will be using 1&5/8th 120 wall DOM, he is going with the good stuff on this cage, the few xtra bux on material is way worth the strength factor.
centralmasssamurai:
--- Quote from: gearhead1985B on December 15, 2009, 05:59:15 AM ---you need to add a virtical rizer in the middle (see thick green lines ) and move the red bar with the x on it to where the orange line is and it is always good to add some door bars othe than that it looks like it will be a very strong cage and don't forget to add gussets
are you planning to add five point harnesses if so you need to add some horizontal bars across slightly below shoulder height
--- End quote ---
I asked him & he said he wants to be able to open the back doors or Id agree he needs support where you put the green lines, so to take care of the strength issue there, I will be running an interior X out through the roof and tieing it into the halo right behind the front seats, also keep in mind just behind the back doors where the roof will end and the halo drops down there will be another large X/tie mount and a cross brace, also the roof where the rack use to be will also be */x thats an X plus an additional bar, one thing for sure, this will be one rugged -bash into off of & over anything he wants to hit!!!
As soon as I get started on this EXO I will be sure to snap a few pix and post them up!!!
Last week I just removed my EXO off of my buggy to redo it, so as soon as thats done/underway I will start on Nates rig!!! 8)
Stay tuned!!! Scott <CentralMassSamurai>
P.S my harnesses out of my drag car expired this summer so they wont pass tech next season,,so maybe Ill supprise Nate and put them in for him, something tells me he might need them ;)
calvynandhobbs:
Scott, it will be great seeing the progress of the cage as it evolves. Someday when I can get a new DD I might think about exo-caging my TJ and trailering it to go off-roading.
centralmasssamurai:
Well,,,The holidays are over and now the winter cage building has begun!!! ;D
I thought I would stop by here and show you guys whats going on,,Nate brought his rig up too me as you all know. Some of you saw my Samurai at the toy run and might have noticed it had been modified a few times over the last cpl years. So the day after the toy run I decided to remove it and re-do it completely. That was before nate got his Jeep up to me. Since then I/we a friend of mine and I have teamed up and purchased alot of new equipment fab equipment that is.
We purchased a new bender JD32 air over hydrolic& the newest Bendtech software to go along with it. We started on my cage as a ginnie pig, I took a few pix to show how its going so far, as soon as we get this rig done we will jump om Nate Jeep. We got all of our 260' of DOM tubing and let me tell you this stuff is rugged!!!!! The bender makes it so smooth and easy we are loving it!!! here is a few teaser pix. We hope to have my rig done by the end of Jan and started on Nates right after. The progress we are making it might be sooner. The pix Im going to post are 1 weekends work!!! keep in mind 2 guys so twice the hours, we already have 40 hours into it!!!
centralmasssamurai:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version