Author Topic: Dana 30 HP  (Read 1444 times)

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Dana 30 HP
« on: October 21, 2009, 04:56:11 AM »
dana 30 with 3.55 gears $150
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline TJ777

  • Trail Queen
  • **
  • Posts: 82
Re: Dana 30 HP
« Reply #1 on: January 11, 2010, 06:23:08 PM »
TJ? complete brakes and all?
also is there any damage to it? I just broke alot of teeth in mine.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Dana 30 HP
« Reply #2 on: January 11, 2010, 06:51:16 PM »
TJ? complete brakes and all?
also is there any damage to it? I just broke alot of teeth in mine.

I'm pretty sure this out of an XJ, but it can be used in a TJ as long as it is lifted. Stock TJs will have the exhaust hit a HP 30 front driveshaft if they are not lifted. What gearing do you have in your TJ? I don't recall seeing any TJs with 3.55s, but I could be mistaken.
1994 YJ on 37s

Offline TJ777

  • Trail Queen
  • **
  • Posts: 82
Re: Dana 30 HP
« Reply #3 on: January 11, 2010, 06:59:47 PM »
i think there 3.73's not really sure but i have a 6inch lift on 33's.

Offline TJ777

  • Trail Queen
  • **
  • Posts: 82
Re: Dana 30 HP
« Reply #4 on: January 12, 2010, 01:04:48 AM »
if it has all the same brackets consider it sold. My fiance and I are in the middle of planning a wedding so if I could wait until I get my taxes back deal! 

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: Dana 30 HP
« Reply #5 on: January 12, 2010, 02:24:09 AM »
Hey brad welcome back!
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline TJ777

  • Trail Queen
  • **
  • Posts: 82
Re: Dana 30 HP
« Reply #6 on: January 12, 2010, 02:43:52 AM »
hey

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Dana 30 HP
« Reply #7 on: January 12, 2010, 03:49:26 AM »
Nate, are the axleshafts good in it? Any upgrades to ujoints or anything like that? I'm just thinking that I could save TJ777 a lot of regearing money by selling him my front axle out of my TJ that already has 3.73 gears and a front locker in it. Regearing is going to run probably around $600 or more by the time you buy the parts and then have them installed. I was planning on just stripping my front axle for axleshafts for spares, selling the locker separately and junking the rest of it or giving the housing away.
1994 YJ on 37s

Offline TJ777

  • Trail Queen
  • **
  • Posts: 82
Re: Dana 30 HP
« Reply #8 on: January 12, 2010, 02:42:08 PM »
yea if your tj front end is up for sale SOLD I just need a front axle bad! I hate having to drive it with it missing teeth and bearings in it. lol