The Mud Pit > Wrenching

Pump for Gear Lube

<< < (3/3)

gearhead1985B:
I got one up here at the shop

Mr Rock:

--- Quote from: calvynandhobbs on September 23, 2009, 02:29:13 PM ---
--- Quote from: Mr Rock on September 23, 2009, 05:39:44 AM ---I use a long clear hose and run to up to the brake booster and fill from there.

--- End quote ---

That's not a bad idea. I would only make a mess at the end when fluid starts coming out the fill hole and I still have a hose full of fluid.

--- End quote ---

True, but if you looked up the capacity which I think is 3.2 qt and only used that much, and yu used a clear hose you could see when it started to "back up" and you would only have a small spill which you could capture with a couple of rags!

kirksjeep:

--- Quote from: Mr Rock on September 23, 2009, 11:47:43 PM ---
--- Quote from: calvynandhobbs on September 23, 2009, 02:29:13 PM ---
--- Quote from: Mr Rock on September 23, 2009, 05:39:44 AM ---I use a long clear hose and run to up to the brake booster and fill from there.

--- End quote ---

That's not a bad idea. I would only make a mess at the end when fluid starts coming out the fill hole and I still have a hose full of fluid.

--- End quote ---

True, but if you looked up the capacity which I think is 3.2 qt and only used that much, and yu used a clear hose you could see when it started to "back up" and you would only have a small spill which you could capture with a couple of rags!

--- End quote ---
Nice Idea ;)

Navigation

[0] Message Index

[*] Previous page

Go to full version