The Mud Pit > Wrenching

I need to find a good shop

<< < (3/3)

rocket:
4.10 is not necessisarly standard, even for 4x4.  Welcome felow Taco guy!

You could consider going non-add if you are ADD.  this allows for a little more lift on the front (up to 3.5") since your CV's are not continously spinning.

Better yet, do a SAS!

My garage is open for the job, i have most/all the tools we would need and the space to do it.

smaug1911:
i
--- Quote from: rocket on July 10, 2009, 03:18:32 PM ---4.10 is not necessisarly standard, even for 4x4.  Welcome felow Taco guy!

You could consider going non-add if you are ADD.  this allows for a little more lift on the front (up to 3.5") since your CV's are not continously spinning.

Better yet, do a SAS!

My garage is open for the job, i have most/all the tools we would need and the space to do it.

--- End quote ---

Yes, 4.30, 3.91, and 3.58's exist in different tacomas, but 4.10 is the most likely to be found in any individual truck. OK...so maybe it isn't the "standard"...but it is the most often factory installed gears.

smaug1911:

Complete 4.10 front diff with a locker!!

http://www.ttora.com/forum/showthread.php?t=136049

Navigation

[0] Message Index

[*] Previous page