« previous next »
Pages: [1]   Go Down

Author Topic: 6/17 brake job at my house  (Read 1804 times)

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
6/17 brake job at my house
« on: June 17, 2009, 12:13:08 AM »
I am replacing the rear brake shoes on my tacoma tomorrow.

never done this job, so any help is welcome.

885-1212

brian

204 Connecticut Blvd
Oakdale, CT
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: 6/17 brake job at my house
« Reply #1 on: June 17, 2009, 02:21:33 AM »
Do you have Drum Brake tools for the springs?  I would offer to come over since I am so close, but I will be getting my Jeep ready for Saturday.  I'll be home after 1300, so feel free to stop by and borrow any tools you need, or if you want I can come on over and do it here.  You know how to get here, and my phone number is listed in the Members Section.

Drum Brakes are look intimidating, but really are not that hard. 
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: 6/17 brake job at my house
« Reply #2 on: June 17, 2009, 02:49:28 AM »
I have the (for lack of a better word)..."spanner pliers" that stretch the springs. but I don't have the bolt removal tool.
I set the project up tonight...wheels are off and truck is on stands.

Planning to get started in the morning. I will give you a call if i am still working around 1300.

Thanks!
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: 6/17 brake job at my house
« Reply #3 on: June 17, 2009, 04:18:59 AM »
Sounds like a plan. 
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

PaulW

  • Guest
Re: 6/17 brake job at my house
« Reply #4 on: June 18, 2009, 12:04:49 AM »
Too bad i read this to late.  I have everything you need and could have helped ya get it done in about 45 min.  dont forget to put the adjuster plugs back in when your all done adjusting the brakes.  they'll help keep the mud out.
« Last Edit: June 18, 2009, 12:55:39 AM by PaulW »
Logged

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: 6/17 brake job at my house
« Reply #5 on: June 18, 2009, 04:30:41 AM »
Ended having to replace the wheel cylinders too....so a run to Autozone was necessary.

45 ended up taking about 6 hours.
 But the job is done....maybe I will rebleed the brakes with some help next week.
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

PaulW

  • Guest
Re: 6/17 brake job at my house
« Reply #6 on: June 19, 2009, 03:26:22 PM »
Quote from: smaug1911 on June 18, 2009, 04:30:41 AM
Ended having to replace the wheel cylinders too....so a run to Autozone was necessary.

45 ended up taking about 6 hours.
 But the job is done....maybe I will rebleed the brakes with some help next week.

Use a vacum bleeder it will save you the hassle of finding help.
Logged
Pages: [1]   Go Up
« previous next »