Author Topic: Gears  (Read 897 times)

nvrdun

  • Guest
Gears
« on: April 28, 2009, 05:37:40 PM »
Since im going up in tire size i need to re gear my CJ, should i go with 4.10 or 4.56 keep in mind that i still want to be able to cruise around in my rig! is not just a trail rig. 
let me have it GO! ;)
« Last Edit: April 28, 2009, 05:43:42 PM by nvrdun »

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: Gears
« Reply #1 on: April 28, 2009, 05:42:01 PM »
4.10's would be good for you if you want to be able to drive it to and from trails without running at 3500 rpm at 65...

PaulW

  • Guest
Re: Gears
« Reply #2 on: April 29, 2009, 12:26:39 AM »
5.38's do it once and do it way overkill.

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: Gears
« Reply #3 on: April 29, 2009, 02:17:31 AM »
I have 35" BFG and I have 4.10 gears.  I don't have my speedo calibrated, but I would guess that at 65 mph in 5th gear I am at 2000 rpm, and in 4th gear (long hills) I am at 2400 rpm.  According to the charts in 4wd hardware 4.10 gears are best for gas milage with 35's, but 4.56 or 4.88 would be best for off road. 

I had 3.73 gears with 35's and that sucked.  I am happy with the 4.10 gears........but since my Jeep is mostly a toy I would like to go to 4.88 gears in the future, but I have plenty of other stuff I would rather get right now. 
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

nvrdun

  • Guest
Re: Gears
« Reply #4 on: April 29, 2009, 02:48:41 AM »
Thanks for your inputs! 8)

PaulW

  • Guest
Re: Gears
« Reply #5 on: April 29, 2009, 01:53:26 PM »
i've run 33's on almost every gear ratio you can imagine that was ever in or made for xj's.  3.07, 3.55, 3.73, 4.10, 4.56, 4.88, the 4.88 were actually fine for me when going down the highway 70 at 2800 rpm was fine.  but for the 35's go at least 4.88.  it's better to overgear the axles and add an od in the driveline, then to have to re-do the axles again.