« previous next »
Pages: [1]   Go Down

Author Topic: I need to find a good shop  (Read 2695 times)

Offline 00toyo

  • Trail Passenger
  • *
  • Posts: 2
I need to find a good shop
« on: July 09, 2009, 08:37:04 PM »
Does anyone know of a trust-worthy shop that can work on 4x4's. Or have any suggestions on how I can fix my 2000 toyota tacoma? I cracked my front gear housing and tore up the gears. I am not positive how to do the front end. I'm not afraid to turn a wrench just not sure. I just want to have my truck 4x4 again. Please Help.
Logged

PaulW

  • Guest
Re: I need to find a good shop
« Reply #1 on: July 09, 2009, 10:30:24 PM »
get an entire boneyard front diff.
Logged

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: I need to find a good shop
« Reply #2 on: July 09, 2009, 10:45:09 PM »
Smith's 4x4 in Franklin

or I also like Joel at Stop and Go Transmissions in Groton
Logged
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline reptile610

  • Trail Master
  • *****
  • Posts: 862
Re: I need to find a good shop
« Reply #3 on: July 09, 2009, 10:47:20 PM »
yeah stop n go trans is amazing and the guys there are good to ya.
Logged
1982 CJ7-stock

Owning a CJ is for manly men, they allows you to do manly stuff like auto mechanics and welding and drinking beer. Manly men own CJs. Manly men do not drive hummers, they receive them.

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: I need to find a good shop
« Reply #4 on: July 10, 2009, 12:21:22 AM »
http://ctaxleservice.com/

Pete has done work for several members in this club, including myself.  The only problem is, he's up in Ellington, Ct.  That's about an hour and a half from Groton.  He does great work and absolutely no one else in Ct can beat his prices that I know of.
Logged
Axle:  2
Nemesis: 1

I win!

PaulW

  • Guest
Re: I need to find a good shop
« Reply #5 on: July 10, 2009, 03:07:07 AM »
If you cracked the housing then the whole thing needs to be replaced.  Check Car-Part.com
Logged

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: I need to find a good shop
« Reply #6 on: July 10, 2009, 04:00:31 AM »
I would have to agrre with Paul on this one, just replace it.  If the housing is broken and the gears are toast, then find one out of a bone yars.   www.car-part.com can be used to find one, but some yards don't keep thier stuff updated so call first.  Also if you find a few, you can negotiate the price a little.

So how did you manage to do this much damage? 
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: I need to find a good shop
« Reply #7 on: July 10, 2009, 04:29:37 AM »
Great...another Tacoma guy!!!

Check TTORA or Northeast toyota crawlers for someone who has done a solid axle swap. They will let their from differential go for $100 or less.

I can help you with the work.

Just make sure the gear ratio matches. 4.10 is standard but there are others out there in certain trucks.
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: I need to find a good shop
« Reply #8 on: July 10, 2009, 04:35:24 AM »
Oh...and make sure the front diff is either ADD or non-ADD depending on what you have.

I assume ADD
(do you have to lock your hubs at the wheel?)
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

PaulW

  • Guest
Re: I need to find a good shop
« Reply #9 on: July 10, 2009, 02:19:11 PM »
Quote from: smaug1911 on July 10, 2009, 04:29:37 AM
Great...another Tacoma guy!!!

Check TTORA or Northeast toyota crawlers for someone who has done a solid axle swap. They will let their from differential go for $100 or less.

I can help you with the work.

Just make sure the gear ratio matches. 4.10 is standard but there are others out there in certain trucks.

Ya you taco guys are a weird breed.  Good suggestion Brian.
Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: I need to find a good shop
« Reply #10 on: July 10, 2009, 03:18:32 PM »
4.10 is not necessisarly standard, even for 4x4.  Welcome felow Taco guy!

You could consider going non-add if you are ADD.  this allows for a little more lift on the front (up to 3.5") since your CV's are not continously spinning.

Better yet, do a SAS!

My garage is open for the job, i have most/all the tools we would need and the space to do it.
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: I need to find a good shop
« Reply #11 on: July 11, 2009, 12:10:17 AM »
i
Quote from: rocket on July 10, 2009, 03:18:32 PM
4.10 is not necessisarly standard, even for 4x4.  Welcome felow Taco guy!

You could consider going non-add if you are ADD.  this allows for a little more lift on the front (up to 3.5") since your CV's are not continously spinning.

Better yet, do a SAS!

My garage is open for the job, i have most/all the tools we would need and the space to do it.

Yes, 4.30, 3.91, and 3.58's exist in different tacomas, but 4.10 is the most likely to be found in any individual truck. OK...so maybe it isn't the "standard"...but it is the most often factory installed gears.
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: I need to find a good shop
« Reply #12 on: July 11, 2009, 03:10:08 AM »

Complete 4.10 front diff with a locker!!

http://www.ttora.com/forum/showthread.php?t=136049
Logged
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.
Pages: [1]   Go Up
« previous next »