Author Topic: awesome deal on Black+Decker Drill  (Read 1995 times)

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
awesome deal on Black+Decker Drill
« on: April 03, 2009, 09:24:00 PM »
I picked up a B+D VPX cordless drill today.
These are lithium-ion rechargeable and run off 2 batteries.
The whole set comes with the drill, 2 batteries, charger, and bits.

http://www.thegreathardwarestore.com/ProductDetails.asp?ProductCode=808467&click=2744

Black+decker at the Westbrook, CT outlet (exit 65) has these marked at $24.98.....
but they are 30% off of that price. So about $17.50.

That is the cost of 1 replacement VPX battery!

sweeet
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: awesome deal on Black+Decker Drill
« Reply #1 on: April 04, 2009, 03:36:38 AM »
I forgot...regular price is like $80+
Online price is about $40+

But here is the best part...

The entire store is having a 30% sale on items whose price ends in "8"
e.g. $24.98

This ends up being about 1/3 of the entire store. Great place to pick up extra drill bits and power tools at a sale off the "outlet" price.
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #2 on: April 04, 2009, 03:07:49 PM »
DAMN and i just bought all ryobi!

Offline phoenix

  • Mudd Hog
  • ***
  • Posts: 136
Re: awesome deal on Black+Decker Drill
« Reply #3 on: April 04, 2009, 04:26:28 PM »
I got a Ryobi set as well, needs MORE new batteries for it tho. I seem to cook them fairly quick. $40-50 for a pair!

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #4 on: April 04, 2009, 04:43:48 PM »
I got a Ryobi set as well, needs MORE new batteries for it tho. I seem to cook them fairly quick. $40-50 for a pair!

i warranty them.  my brother-in-beer works at home depot and he just keeps changing them out for me.

Offline Swagger

  • Rock Crawler
  • ****
  • Posts: 416
Re: awesome deal on Black+Decker Drill
« Reply #5 on: April 04, 2009, 06:03:50 PM »
that aint a warranty. :-\
FOR SALE:  2000 TJ with some stuff and uber low mileage.  $9500 obo. Come to Texas and buy my junk!!!

I like to smash things!!!!

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #6 on: April 04, 2009, 06:14:33 PM »
that aint a warranty. :-\

but if it works 8)

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: awesome deal on Black+Decker Drill
« Reply #7 on: April 04, 2009, 07:21:23 PM »
I'll stick w/ my 18v dewalt.  teh xrp batteries last a lot longer than the hour it take to charge them.  plus it drill through 1/2" steel w/o a problem :D
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #8 on: April 04, 2009, 09:38:04 PM »
I'll stick w/ my 18v dewalt.  teh xrp batteries last a lot longer than the hour it take to charge them.  plus it drill through 1/2" steel w/o a problem :D


i got a drill press for that.

Offline phoenix

  • Mudd Hog
  • ***
  • Posts: 136
Re: awesome deal on Black+Decker Drill
« Reply #9 on: April 05, 2009, 01:01:51 PM »
Lot of work to get a frame into a drill press tho! lol I got my wife a 12v dewalt use a few years ago, It's a bit heavy for her, but I LOVE it!! I honestly think it has more power then the 18v ryobi, and I KNOW the battery lasts longer. Too bad the motor is smoking itself to death.

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #10 on: April 05, 2009, 04:31:21 PM »
Lot of work to get a frame into a drill press tho! lol I got my wife a 12v dewalt use a few years ago, It's a bit heavy for her, but I LOVE it!! I honestly think it has more power then the 18v ryobi, and I KNOW the battery lasts longer. Too bad the motor is smoking itself to death.

actually i built a jig for my drill press so i could use it sideways.  works pretty damn good.

Offline Swagger

  • Rock Crawler
  • ****
  • Posts: 416
Re: awesome deal on Black+Decker Drill
« Reply #11 on: April 14, 2009, 05:33:31 PM »
my craftsman does the job pretty well
FOR SALE:  2000 TJ with some stuff and uber low mileage.  $9500 obo. Come to Texas and buy my junk!!!

I like to smash things!!!!

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: awesome deal on Black+Decker Drill
« Reply #12 on: April 15, 2009, 03:58:08 AM »
I'll stick w/ my 18v dewalt.  teh xrp batteries last a lot longer than the hour it take to charge them.  plus it drill through 1/2" steel w/o a problem :D

Drill press isn't very portable, is it?


i got a drill press for that.
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: awesome deal on Black+Decker Drill
« Reply #13 on: April 15, 2009, 10:36:10 PM »
I'll stick w/ my 18v dewalt.  teh xrp batteries last a lot longer than the hour it take to charge them.  plus it drill through 1/2" steel w/o a problem :D

Drill press isn't very portable, is it?


i got a drill press for that.

it is now, i can rotate the drill press 360 degrees and made a clamp to mount to frames works pretty good.