Author Topic: Metal lathe  (Read 3075 times)

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Metal lathe
« on: January 12, 2009, 02:54:51 PM »
Free metal working lathe
Ever wanted your own metal working lathe? We've got one you can have for free, we're told it's in working condition by someone that knows about them. The catch? It weighs about 2,000+ pounds, it's in our basement and you need to get it out without damaging our house. It's probably 30-40 years old, an old-school machine that might be useful. I can get more info/pictures if you're interested. (yes, this seems like a ridiculous posting, I know)
Contact: Jennifer Munzner Office Phone: 6866999
Email: jennifer.b.munzner@pfizer.com

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Metal lathe
« Reply #1 on: January 12, 2009, 03:10:57 PM »
I just emailed her.  If it breaks down in small enough peices, I could set up a 2x4 rail system on her bulkhead steps and winch/come-a-long it out and take the peices on my trailer in a few trips.
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: Metal lathe
« Reply #2 on: January 12, 2009, 04:02:40 PM »
I just emailed her.  If it breaks down in small enough peices, I could set up a 2x4 rail system on her bulkhead steps and winch/come-a-long it out and take the peices on my trailer in a few trips.

Imagine the shit we can make with that Jeremy!!!! I've used one before...It's been probably 20 years but it's fairly basic...We can make pipe caps, drill into the end of round stock, make knurled handles with threads inside them!

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: Metal lathe
« Reply #3 on: January 12, 2009, 04:03:28 PM »
It's crazy, but the possibilities are endless!!!   ;D
Axle:  2
Nemesis: 1

I win!

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: Metal lathe
« Reply #4 on: January 12, 2009, 04:15:49 PM »
If you guys get it I get a finders fee of "teaching and use"

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Metal lathe
« Reply #5 on: January 12, 2009, 05:33:56 PM »
I'm second on the list of takers.  She said there is a bulkhead door, but no room for a truck to get back there.  anyone have access to a pallet jack?  there is a sidewalk.  If I get selected, i'll go check it out and come up w/ a removal plan (ramps, comalongs, cherry-pickers, etc)  I will need help, but of course any helpers will get access to use it.
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Metal lathe
« Reply #6 on: January 12, 2009, 09:17:30 PM »
awesome

PaulW

  • Guest
Re: Metal lathe
« Reply #7 on: January 13, 2009, 12:18:35 AM »
how about a lull??

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Metal lathe
« Reply #8 on: January 13, 2009, 02:08:00 AM »
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: Metal lathe
« Reply #9 on: January 13, 2009, 03:20:05 AM »

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Metal lathe
« Reply #10 on: January 13, 2009, 05:57:19 AM »
if it were smaller, it would work.  there is a headge blocking access to the bilko; cant even get a truck back there.  I'm thinking some comalongs, steel/wood beams to act as a ramp, palet jacks to move it to the front (on a sidewalk), then cherry picker to lift it onto trailer.  I may have to rent a uhaul open one, as mine is only rated for 900#.  but all this is only if the first guy backs out
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: Metal lathe
« Reply #11 on: January 13, 2009, 06:06:11 AM »
I think my utlility trailer is good for 1500 lbs, if you are interested I'll check.  I would offer up the car trailer, but you'll have to wait for the snow around it to melt. 
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Metal lathe
« Reply #12 on: January 13, 2009, 09:04:12 PM »
i can just imagine a lathe on a car trailor. interesting to explain.

PaulW

  • Guest
Re: Metal lathe
« Reply #13 on: January 14, 2009, 01:11:11 AM »
i can just imagine a lathe on a car trailor. interesting to explain.

Tell em that the lathe got a flat and you had to tow it home.

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Metal lathe
« Reply #14 on: January 15, 2009, 12:19:31 AM »
lol. i can just imagine