Author Topic: Control Arm Bracket  (Read 9233 times)

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Control Arm Bracket
« Reply #30 on: January 24, 2009, 03:09:42 PM »
Rich, i left my heater and grinder in the cab of the xj.  I won't be there (was up at 4am and need a nap before snowboarding in MA w/ my brother), sorry.  I'll get my stuff from you later.

you use a garage for storage?  SHAME ON YOU!!  You know better!  a garage is for parking vehilces and doing work/projects.  get a storage shed!
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #31 on: January 24, 2009, 07:05:46 PM »
yea get a shed!

Offline CaptORM

  • Rock Crawler
  • ****
  • Posts: 497
    • JT 4X4
Re: Control Arm Bracket
« Reply #32 on: January 25, 2009, 03:25:02 AM »
Well the control arm brackets are in and good to go.  Thanks Roger, Scott, and Axle for giving me a hand.   

Went pretty smooth if I say so myself.  Only had to buy one castle nut for the tie rod after screwing it up. 

Drives like a queen again so the brackets must be in the right place and the axle must be lined up properly. 

Rocket you have seen the housing garages correct.  They are pretty small.  Working on a jeep in one of the garages would be kinda tight.  And what the hell else am I suppose to do with all the crap from my boats all winter.  Put it in my living room so I can park a car in the garage.  i dont think so.  Anyway.  Thanks for the grinder rocket help us cut a few minutes on grinding time with two grinders.  Thanks again.   
I do cheeks for free just ask...
 
 l  
 l _[==]__o___o
 l//_|__l__l,\___\,___
 l_--\__\__l_/---\_[] llll [)
  (o)_)        (o)_)--o)_)



96 Jeep Grand Cherokee
6.5" lift, 33's

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #33 on: January 25, 2009, 04:07:24 AM »
And what the hell else am I suppose to do with all the crap from my boats all winter. 

Leave it on the boat??

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Control Arm Bracket
« Reply #34 on: January 25, 2009, 04:20:46 AM »
Rich, I'm glad to hear you got it finished up this afternoon. I wish I could have stayed longer, but had lots of homework to do.
1994 YJ on 37s

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: Control Arm Bracket
« Reply #35 on: January 25, 2009, 04:45:50 AM »
I stopped by after the game and helped him finish up.  It took maybe another hour after you guys had left.
Axle:  2
Nemesis: 1

I win!

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #36 on: January 25, 2009, 04:57:18 AM »

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Control Arm Bracket
« Reply #37 on: January 25, 2009, 05:26:39 AM »
I"m glad you guys got it done, i feel bad i had to bail, but family comes first!  You gonna be around sunday?  I can grab my stuff (and get Scott back his grinder)
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: Control Arm Bracket
« Reply #38 on: January 25, 2009, 02:31:02 PM »
I should be home all day...If not, call me and tell me where you're leaving it...

Offline CaptORM

  • Rock Crawler
  • ****
  • Posts: 497
    • JT 4X4
Re: Control Arm Bracket
« Reply #39 on: January 25, 2009, 04:24:23 PM »
home all day
I do cheeks for free just ask...
 
 l  
 l _[==]__o___o
 l//_|__l__l,\___\,___
 l_--\__\__l_/---\_[] llll [)
  (o)_)        (o)_)--o)_)



96 Jeep Grand Cherokee
6.5" lift, 33's

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #40 on: January 25, 2009, 06:53:48 PM »
PICS!!

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Control Arm Bracket
« Reply #41 on: January 25, 2009, 11:07:07 PM »
Oops!  forgot your grinder at home scott, and forgot to hit your house rich.  will the wives be home tomorrow?  Rich, I can grab my stuff from where i left it.
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #42 on: January 25, 2009, 11:44:45 PM »
will the wives be home tomorrow? 

WOW!!

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Control Arm Bracket
« Reply #43 on: January 26, 2009, 12:15:27 AM »
so i can get my stuff and give scott his
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: Control Arm Bracket
« Reply #44 on: January 26, 2009, 12:18:54 AM »
so i can get my stuff and give scott his

I figured that much, I'm just trying to be lively.  That and I have a dirty mind :D